ResMed H4i™ Heated Humidifier with Water Chamber for S8™ & S8™ II Series CPAP & BiPAP Machines (Discontinued)

Discontinued in December 2022, Only for Reference

Compatibility: S8 AutoScore™, S8 AutoSet Vantage™, S8 AutoSet Spirit™, S8 Escape™, S8 Lightweight™, S8 Escape™ II, S8 Elite™ II, S8 AutoSet Spirit™ II, VPAP™ IV

In the Package: H4i Heated Humidifier with Standard Water Chamber 

Travel Design: Compact design ideal for travelers

Distinct Dial: Easy to use in the dark

Fliptop Lid Design: Convenient and user-friendly; no need to remove the tube to refill water chamber

Chamber Capacity: 390mL of humidification capacity to the fill line

Seamlessly Integrated Unit: Snaps into place whenever required

Automatically Detectable: The Humidifier is automatically detected by the air-flow device

Long Lasting Scratch Resistance: Stainless steel plate and nickel-coated aluminium heater

Compared to the Humidaire H3i design the H4i heated humidifier provides a larger water chamber, a larger heating plate, a more robust design with metal reinforcements and provides 30% more humidity. The H4i helps soothing dry mouth and nasal irritation, and provides high efficiency humidification. Responds to humidification needs at higher flow rates and pressures, thanks to its large capacity of 390 mL. Easy to use in the dark. Convenient fliptop lid design.

Distilled water is preferable, we suggest to renew it every day. For best results wash with water and a little vinegar or with mild detergent.

SPECIFICATIONS:

Maximum Heater Plate Temperature: 85°C (~ 185°F)

Temperature Cut-out: 93°C (~ 200°F)

Maximum Gas Temperature: 41°C (~ 106°F)

Dimensions: 130 mm x 170 mm x 210 mm (5.12'' x 6.70'' x 8.35'')

Weight: 0.78 kg (~ 1.70 Lbs)

Power Supply: Input range for ResMed devices with H4i: 100–240V, 50/60Hz

Docking Station: Flame retardant engineering thermoplastic, plated cast aluminium

Water Chamber: Injection molded plastic, stainless steel and silicon seal

Operating Temperature:  5ºC to 35ºC (+41ºF to +95ºF)

Operating Humidity: 10–95% non-condensing

Storage and Transport Temperature: -20ºC to 60ºC (-4ºF to +140ºF)

Storage and Transport Humidity: 10–95% non-condensing

Certified Quality

Manufacturer: ResMed

Country of Origin: Australia

Part Number: 26941

Download H4i User Guide

Download H4i Fact Sheet

Download H4i Components Card

Download ResMed Humidifier Compatibility List

Download ResMed Humidifier Compatibility List in Greek (Ελληνικά)